My first model MDF with arrows pointing to errors.When it comes to do precision work which must be performed repeatedly, it is easy to fall into the wail of the siren of the router.
The router is probably my favorite tool less for woodworking. I do not like how it is noisy. Never, it produces a ready surface at the end for mouldings. And it can destroy a piece faster as any tool I do business with.I attribute my aversion to this tool to a lack of staff in my head. I've seen authors and collaborators of miracles with this tool. For me, almost every encounter is frustrating. So it may be a genetic problem.
Today, I tried to go beyond my disgust for the tool and made the crazy complex models for a few handfuls of brass that I install on a teak campaign chest. These handles require recesses in two different layers, and there is no one right angle.So I made with care a model of MDF, but I discovered that I had made a few errors of Cup. No problem. I made another model of MDF. It has worked well for the first two cuts of sample, but the main defence forces was too soft. The bearing on my small model compressed the MDF and the break was too large for the material.
So I used the model Baltic Birch plywood. It would be certainly hard enough.It was not. In two key areas, Birch compressed and left a gap between the wood and hardware.
I had started this process at 11-17 I realized that I had been messing about with these models for six hours and has not had a single installed traction.I caught a chisel. And in 20 minutes, I had installed sweater.
If you like your router, then more power to you. I have - after 23 years to play with them, realized that I am not a guy from router.-Christopher Schwarz
A sweater, I installed with a chisel. There are a few small gaps which can be fixed with shards of wood, glue and dust.
Chris is a contributing editor to the popular magazine of carpentry and the Publisher to Lost Art Press. It is a passion for hand-tool (although it uses power tools, too).
沒有留言:
張貼留言